JC Valves

VÁLVULAS DE GLOBO

VÁLVULAS DE GLOBO

Stem

The stems of JC globe valves are forged from one piece and ACME threaded, then mechanized and finally provided with a smooth finishing in order to minimize friction.

 

Body and Bonnet Gasket

The design of the body-bonnet gasket varies depending on the class of the valve.
Class 150 to 600 globe valves consist of a circular male-female connection with a graphite or spiral wound gasket.
Class 900 and above globe valves consist of a ring type joint.
In pressure seal designs the sealing is achieved through a gasket that takes advantage of the internal pressure of the line. The material most commonly used is high-purity graphite being located between the body and the body retainer ring.

 

Body and Bonnet

Bodies and bonnets are high quality cast and afterwards precisely machined, directing the attention to prevent stress concentration.
Bonnets are made either of one piece only –the yoke then being an integral part of it – or have two pieces, depending on the size of the valve. This ensures the perfect alignment with the body what leads to an accurate opening and closing.
Bodies of globe valves are designed considering the same characteristics as gate valves, which in this case means that the disc is guided in bigger valve sizes or high pressure service in order to avoid vibrations and better seat.

 

Backseat

All JC gate and globe valves have backseat threaded in the bonnet, or for the pressure seal valves, welded to the bonnet.The hard facing is stellite 6 or equivalent.

TTV-JC GROUP MIDDLE EAST

Reciba información
por mail.

CATÁLOGOS

CATÁLOGOS

Descargar los catálogos de nuestros productos.

APLICACIÓN MÓVIL

APLICACIÓN MÓVIL

Nueva aplicación para dispositivos móviles.